Part Number
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 18857 | ARMOR ELEVATOR CO INC |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADBG | NUT THICKNESS | 56.0 MILLIMETERS NOMINAL |
| BZRR | THREAD SERIES | M |
| ABQU | DRIVE POINT DEPTH | 25.0 MILLIMETERS NOMINAL |
| CQFM | HARDNESS RATING | NOT RATED |
| FEAT | SPECIAL FEATURES | ONE SLOT LOCATED ON SURFACE OF NUT; 13.9MM (MIN),14.3MM WIDE; 8MM DEEP; TWO HOLES IN SL0T 85MM APART FROM CENTER TO CENTER DIAMETER 0F EACH HOLE; EACH HOLE 2MM DEEP, 5MM DIAMETER.H |
| ADBM | DRIVE POINT QUANTITY | 4 |
| AZKQ | TEMP RATING | NOT RATED |
| ACTA | NUT STYLE | ROUND |
| ACTD | NUT DIAMETER | 110.0 MILLIMETERS NOMINAL |
| AFGF | DRIVE POINT DIAMETER | 42.0 MILLIMETERS NOMINAL |